|
|
 |
One Piece Splice-Lock
|
|
Wagner One Piece Splice-Locks™ are designed for the alignment of Handrail sections and as expansion joints. They are most effective as a joint stiffener when used within 12" of a welded post or Handrail Bracket.
Splice-Locks™ have a similar shear strength as standard pipe, but are not to be used in post assemblies.
Single-Lock Splice-Locks™ are for use as connectors or expansion joints. For maximum strength, use Double-Lock Splice-Locks™. |
|
Splice-Locks™
Now made from Pre-Galvanized Material
|
|
|
SINGLE-LOCK ONE PIECE SPLICE-LOCK™
Note: Both sections to be joined must have the same wall thickness. |
|
|
|
Pipe
|
Sch.
|
Tube Diameter
|
Wall Thickness
|
Galvanized Steel
|
Set Screw
|
|
1-1/4"
|
40
|
1.660"
|
.140"
|
G3314S•
|
3/8" × 11/4"
|
|
1-1/2"
|
40
|
1.900"
|
.145"
|
G3318S
|
3/8" × 13/8"
|
|
• Denotes part shown in photograph
|
|
DOUBLE-LOCK ONE PIECE SPLICE-LOCK™
Note: Both sections to be joined must have the same wall thickness |
|
|
|
|
|
Pipe
|
Sch.
|
Tube Diameter
|
Wall Thickness
|
Galvanized Steel
|
Set Screw
|
|
1-1/4"
|
40
|
1.660"
|
.140"
|
G3354S•
|
3/8" × 11/4"
|
|
1-1/2"
|
40
|
1.900"
|
.145"
|
G3358S
|
3/8" × 13/8"
|
| One Piece Splice-Lock™ Assembly |
- Drill a 13/32" diameter hole for 3/8" screws – 3/8" to center from the end of the pipe or tube for Single-Lock™; 31/32" for Double-Lock™
- Insert Splice-Lock™ into this first section.
- Insert and partially tighten the set screw.
- Slide other section to be joined over the Splice-Lock™. If you are using a Double-Lock Splice-Lock™, drill a 13/32" diameter hole in this other section as well and insert second set screw.
- Complete tightening of the set screw(s) until no movement is possible.
|
|
|
|
|
|
|
|
|